Online only

DJI Phantom 4 Pro+ with Controller & 1080p Display

388198

New

DJI Phantom 4 Pro+ with Controller & 1080p Display

More details

In Stock

Warning: Last items in stock!

1 770,00 €

Add to wishlist

More info

Description
 4 Phantom Pro + by DJI has a camera gimbal 3-axis stabilized 20MP, 1 CMOS "sensor that can shoot up to 4K / 60FPS video and photos as well as gusts of up to 14 fps. The hull has been updated from the previous 4 Phantom, now with the construction magnesium alloy for increased rigidity and reduced weight. the FlightAutonomy system adds rear-view dual Plus with infrared sensors for a total of five directions obstacle detection four directions to avoid obstacles . The ghost 4 + Pro features a high brightness display integrated into the remote control.

 

Gimbal room with 1 CMOS sensor "

 

The camera has a first for the line Phantom: a 20 megapixel CMOS sensor 1 inch. A custom-built lens consists of eight elements arranged in seven groups. The camera boasts mechanical opening that eliminates the rolling shutter distortion that can occur when taking pictures of fast moving subjects or when flying at high speeds and a mechanical focus.

 

1 CMOS sensor "

 

Sensor size is often more important than image quality compared to the number of pixels, because it has a larger sensor dynamic range, better signal-to-noise ratio and enhanced low-light performance. 1 "20MP CMOS sensor in 4 Phantom Pro + is almost four times the size of 1 / 2.3 Ghost 4" sensor. It uses larger pixels and has a maximum ISO of 12,800 as well as a greater contrast.

 

H.264 and H.265 4K Video Recording

 

powerful video processing 4K supports H.264 video at 60 fps and H.265 4K at 30 fps, is registered in a bit rate of 100 Mbps. Advanced sensors and processors make sure everything is captured with greater image detail and image data required to manipulation in post-production.

 

Production optimized 4K

 

An improved video processing system allows video to be captured in film and production-optimized DCI 4K (4096 x 2160) at 60 fps and a 100 Mbps bitrate. The ghost 4 Pro + also supports video codec H.265 at 30 fps in 4K resolution. For a given bitrate, H.265 doubles the amount of image processing such as H.264, resulting in image quality significantly improved by a more efficient compression. Record in the D-log dynamic range high mode to make the most of these image data for color grading.

 

Aim High Resolution

 

The Pro + 4 Phantom camera has an f / 2.8 wide-angle lens optimized air with a 24 mm equivalent focal length. It features eight elements - two aspherical - arranged in seven groups that will fit into a smaller, more compact structure. His images are constantly detailed with low distortion and low dispersion, ensuring that photos and videos are sharp and vivid.

 

mechanical shutter

 

Capture high-speed moving objects has always been a challenge for the flight cameras using an electronic shutter. This is the reason why the Phantom 4 Pro + is the first ghost DJI use a mechanical shutter and a large primary goal opening. A maximum mechanical shutter speed of 1/2000 second eliminates motion blur and "jelly effect" caused by the recovery of a fast moving object with an electronic rolling shutter. The electronic shutter has been improved with a maximum shutter speed of 1/8000 of a second, and a burst shooting mode is not able to shoot 14 fps in 20 megapixels to capture the perfect moment.

 

Remote Controller with Lightbridge HD Video Link

 

The controller 4 Phantom Remote with 1080p display controller integrates a video transmission system HD Lightbridge updated that adds the transmission medium 5.8 GHz. The possibility to choose between 2.4 GHz and 5.8 GHz allows pilots to cut interference, effectively eliminating delays caused when the image you are flying in an area with extensive use of the 2.4 GHz frequency. Normally, the Wi-Fi video transmission systems use a frequency of 2.4 GHz to work with a controller using a frequency of 5.8 GHz, as this prevents interference that may occur when both use the same frequency.

 

Lightbridge HD Video Link

 

The video transmission system used in the Phantom HD Lightbridge 4 Pro + uses TDM (Time Division Multiplexing) to transmit signals, allowing you to send and receive video signals controller transmission signals at the same frequency. While the frequency band 2.4 GHz is often influenced by Wi-Fi, 4G cell phone towers, and other types of interference in urban areas, a band of 5.8 GHz will increase the reliability of transmission. At power up, the Phantom 4 The Phantom 4 Pro + has a display

Reviews

No customer comments for the moment.

Write a review

DJI Phantom 4 Pro+ with Controller & 1080p Display

DJI Phantom 4 Pro+ with Controller & 1080p Display

DJI Phantom 4 Pro+ with Controller & 1080p Display

Write a review